Refrigerator Doors - Sears Kenmore 106 Manual De Uso

Refrigerator Doors
TOOLS NEEDED: _", 1/_,, and _m" he×-head socket wrenches, a flat-head screwdriver and a Phillips screwdriver.
IMPORTANT: Before you begin, turn the refrigerator control OFK Unplug refrigerator or disconnect power. Remove food and any
adjustable door or utility bins from doors.
NOTE: It may only be necessary to remove either the door handle or the doors to get your product through the doorway of your
residence. Measure the door opening to deterrnine whether to remove the refrigerator handles or the doors.
Door Removal
Top Left Hinge
A. Do Not Remove Screw
Base Grille
m Handle Removal
(Optional)
Top Right Hinge
A. Do Not Remove Screw
Bottom Hinge
A, Do Not Remove SGrew
Door Alignment
A. Leveling Screw
Handle Removal {optional)
1. Apply firrn pressure with your hand on the face of trim. Slide
top trim up and bottom trim down away from handle. Lift trim
pieces off shoulder screws. See Graphic 1.
2. Remove handle screws and handles.
3. Move refrigerator into place. Replace handles as shown. See
Graphic 1.
Doer Removal
1. Unplug refrigerator or disconnect power.
2. Open both refrigerator doors. Remove the base grille by
pulling up on the bottom outside corners. See Graphic 2.
3. Close both doors and keep them closed until you are ready to
lift them free from the cabinet.
4. Remove top left hinge cover and screws as shown. See
Graphic 3. Do not remove screw A.
5. Carefully lift freezer deer straight up off bottom hinge. See
Graphic 4.
6. Remove top right hinge cover and screws as shown. See
Graphic 5. Do not remove screw A.
6
7. Carefully lift refrigerator door straight up off bottom hinge.
See Graphic 4.
8. It may not be necessary to remove the bottom hinge to move
the refrigerator through a doorway. Both bottom hinges have
similar construction.
•
Disassemble the hinges as shown. See Graphic 6. Do not
remove screw A.
Door and Hinge Replacement
1. Replace both bottor'n hinges, if rer'noved. Tighten screws.
2. Replace the freezer door by carefully lifting the door onto the
bottom left hinge.
NOTE: Provide additional support for the doors while the top
hinges are being replaced. Do not depend on the door magnets
to hold the doors in place while you are working.
3. Align and replace the top left hinge as shown. See Graphic 3.
Tighten screws.
4. Replace left hinge cover.
5. Replace the refrigerator door by carefully lifting the door onto
the bottom right hinge.
6. Align and replace the top right hinge as shown. See
Graphic 5. Tighten screws.