Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
3
Trim Installation
A.
3
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut. Slide the sleeve
(3) over the cartridge, body and O-ring.
Ensure sleeve is properly positioned over
the front of cartridge.
C.
1
Install volume control handle (1) with lever
to the right, then turn to the on position.
DO NOT SECURE WITH SCREW.
76652 Rev. F
2
1
B.
1
5
4
Escutcheon Installation for
Models T17053, T17253, T17453,
T17067, T17267 & T17467.
9
Secure the escutcheon (1) and backplate (2)
(if your model has one) to the bracket (3) using
the 2 screws provided (4). Do not overtighten
escutcheon screws.If you are installing the
Cassidy models T17097, T17297 & T17497:
Thread the cover (5) onto the escutcheon (1).
For models T17053, T17253, T17453, T17067,
T17267 & T17467:
Install bracket (5) over the cartridge body using
the 2 screws provided (6). Install escutcheon (7)
by placing it over the bracket as shown and
rotating it to lock the tabs (8). Secure the escut-
cheon to the bracket using set screw (9).
6
2
6
5
7
8
3
8
Publicidad
