Water Tank Drainage - Nemaxx BT55X Instrucciones De Uso

KEN001BT55X

WATER TANK DRAINAGE

NOTE
The unit will go on working if the tank is taken out.
Please put the tank back in time after pouring away the water.
Otherwise, it will auto start after 3 minutes, and water will flow to inside of the unit or
indoor.
EN
1. Open the door, grasp the water tank handle firmly
and then pull it out.
2. Stop the unit before taking out the tank.
(Please stop the unit when tank is full, as it will auto start
after 3 minutes, and then water will flow inside the unit).
3. Push the tank into the device completely.
(If you do not stop the device before take out the tank,
it will auto start 3 minutes later).
9
Version: 4.0
28.08.2017