Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the Casters
Two people may be required to
CAUTION
complete installation.
1. Lay the locker on its back. Use the packaging
2. Mount the four swivel casters with brake using
four bolts (AA) and washers (BB) per caster.
NOTE: When locker is connecting to MILWAUKEE
storage which use 6" x 2" casters, install casters
with the two caster riser plates.
3. Tighten all bolts securely with a wrench.
4. Return the locker to its upright position.
AA
Installing the Bumpers
Attach the bumpers using two screws (GG) per
bumper. Do not overtighten the screws.
Shelf clip
Power strip with
magnetic holder
Rubber bumper
*Only install riser
plates when locker
is connecting to
BB
MILWAUKEE storage
which use 6" x 2"
casters.
For each shelf, place four shelf mounting clips, with
16
the clips facing upward, at level height into the locker
mounting rail slots. Insert shelf into locker (1) and
fully seat onto shelf mounting clips (2).
1
4
Installing Magnetic Holder for Power Strip
Place magnetic holder in desired location while
considering cord management.
Install cord brackets in desired location using two
bolts (HH) per bracket while considering cord man-
agement.
HH
Installing Door Storage Bins
Place each bin into the door mounting rail slots at
GG
the desired level height.
4
Installing the Shelves
1
Installing Cord Bracket
2
Publicidad
