Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
EN
Working Methods
Select from two working methods for the vacuum, based on your needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the on/off switch to power it on, and release it to stop immediately.
Method 2: Continuous Cleaning Mode (Trigger Switch Lock )
Click the trigger switch lock to switch to Continuous Cleaning Mode when the vacuum
is running. Then release the on/off switch to make the vacuum in Continuous Cleaning
Mode.
Use the trigger switch lock to free your fingers and avoid finger fatigue caused by
holding the switch.
Note:
• In this mode, the lock indicator will illuminate steadily.
• Click the trigger switch lock again to quit the Continuous Cleaning Mode.
9
Publicidad
