eluxe NETSU Manual De Usuario E Instalacion página 22

Installation Precautions
The wall for mounting the appliance shall be able to withstand at least fourfold
of the total mass of the appliance when filled with water. Take reliable reinforce-
ment measures when necessary.
Appliance should be installed as close as possible to frequent water points to
reduce heat loss from pipelines.
Adequate space must be left around the appliance to facilitate future mainte-
nance. When the appliance is installed above the ceiling, the ceiling shall be
provided with a movable plate and a maintenance window for removing and
installing the appliance.
Safety drainage measures such as floor drains must be in place to prevent
leakage of appliances from causing damage to other facilities.
It must be installed indoors and where the temperature of the link is above 0℃,
so as not to cause ice to break the water pipe of the tank.
There should be no inflammable or explosive objects around the installation
Cautions
appliance.
Do not reverse connection of inlet and outlet water pipes. Sealing gaskets
should be installed at the interface of inlet and outlet water pipes, and the
rotating force should be appropriate during installation.
A safety valve (a pressure relief device) shall be installed at the inlet of the
appliance through which water may flow out of the relief valve drain pipe. The
outlet of the relief valve shall be maintained in contact with the atmosphere.
The drain pipe should be securely fixed at the outlet of the relief valve.
The attachments provided by our company must be used.
Sockets providing power to appliances must be reliably grounded. Do not install
power sockets in places that may be damp or wet.
The installation must be performed by professional installation personnel.
Packing List
Name
Water Heater
Manual
Safety Valve
Water Drain Pipe
Fastening Screw
Quantity
Bracket
1
Sealing Gasket
1
Plastic Expansion Tube
1
1
2
Installation
Quantity
Name
1
1
2