Truper 16885 Manual página 7

Parts
Trigger
Box Impeller
Air
Inlet
Torque
Selector
Assembly
Die Set Up
• Disconnect the tool from the air outlet before replacing
the die.
Nut or
• Select the die you need and set it in the box impeller.
Lug Inlet
• Always use impact dies with this tool. Do not use dies for
hand tools. Consult the catalog to
learn about our accessory's variety.
Box Impeller
• Use 3/8" dies for box impellers.
Inlet
• Using adaptors for other sizes are not recommended.
Use only if strictly necessary.
• If the die has orifices always use rubber rings and steel
Impact
tips when setting it into de box impeller.
Die
• When the box impeller is made with a retaining ring,
verify is in good repair. If damaged, replace immediately.
WARNING
• When a die has not been secured and
adjusted as indicated, it can shoot out and injure the
operator.
Retaining
Ring
7
ENGLISH