Skil 1558AA Manual Original página 7

• Operating the tool
- adjust planing depth
- place tool on workpiece
! ensure that only the front shoe rests on the
workpiece and that the knives do not touch it
- switch on the tool by first pressing knob H ② (= safety
switch which cannot be locked) and then pulling
trigger J ②
! before the knives reach the workpiece, the tool
should run at full speed
! while working, always hold the tool at the grey-
coloured grip area(s) ⑨
- hold the tool firmly with both hands and guide it
forward in a continuous stroke
- use the tool with its base-plate on the workpiece
- do not tilt the tool in order to avoid unwanted planing
marks
! before switching off the tool, you should lift it
from the workpiece
- switch off the tool by releasing trigger J
APPLICATION ADVICE
• For chamfering edges use the V-groove in the front shoe
⑩
- set knob D to position "0" for chamfering edges similar
to groove
- for larger grooves turn knob D to select the required
planing depth
! always test out first on a piece of scrap material
• For more tips see www.skil.com
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool and cord clean (especially ventilation
slots L ②)
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2002/96/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol ⑪ will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
• We declare under our sole responsibility that this
product is in conformity with the following standards
or standardized documents: EN 60745, EN 61000,
EN 55014, in accordance with the provisions of the
directives 2004/108/EC, 2006/42/EC, 2011/65/EU
• Technical file at: SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
NOISE/VIBRATION
• Measured in accordance with EN 60745 the sound
pressure level of this tool is 90 dB(A) and the sound
power level 101 dB(A) (standard deviation: 3 dB), and
the vibration 5.1 m/s² (hand-arm method; uncertainty K
= 1.5 m/s²)
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Rabot
INTRODUCTION
• Cet outil est conçu pour le rabotage des matériaux
en bois, tels que des poutres et des plances; il est
également approprié pour chanfreiner
• Cet outil n'est conçu pour un usage professionnel
• Lisez et conservez ce manuel d'instruction ③
SPECIFICATIONS TECHNIQUES ①
ELEMENTS DE L'OUTIL ②
A Rangement pour la clé
B Boulon de fixation
Vis de l΄arbre porte-couteaux
C
D Bouton de réglage de la profondeur de rabotage
E Indicateur de la profondeur de rabotage
Adaptateur de l'aspirateur
F
G Evacuation copeaux
7
1558