Descargar Imprimir esta página

Craftsman 917.293472 Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Cover\
Knob
COOLING SYSTEM
Your engine is air cooled.
For proper
engine performance and long life keep
your engine clean.
• Clean air screen
frequently
using a
stiff-bristled brush.
• Remove blower housing and clean as
necessary.
• Keep cylinder fins free of dirt and chaff.
Muffler
Blower
Screen
MUFFLER
Do not operate tiller without muffler. Do not
tamper with exhaust system. Damaged
mufflers or spark arresters could create a
fire hazard. Inspect periodically and
replace if necessary. If your engine is
equipped with a spark arrester screen
assembly, remove every 50 hours for
cleaning and inspection. Replace if
damaged.
SPARK PLUG
Replace spark plugs at the beginning of
each tilling season or after every 50 hours
of use, whichever comes first. Spark plug
type and gap setting is shown in =PROD-
UCT SPECIFICATIONS"
on page 4 of this
manual.
TRANSMISSION
Once a season, lubricate the right hand
gear case grease fitting with 1 oz. of EP #1
grease.
CLEANING
Do not clean your tiller when the engine
and transmission are hot. We do not
recommend using pressurized water
(garden hose, etc.) to clean your unit
unless the gasket area around the
transmission and the engine muffler, air
filter and carburetor are covered to keep
water out. Water in engine will shorten the
useful life of your tiller.
• Clean engine, wheels, finish, etc. of all
foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfaces with automo-
tive type wax.
• LCAUTION:
Disconnect
spark plug wire
from spark plug and place wire where it
cannot come into contact with plug.
TILLER
TO ADJUST HANDLE
HEIGHT
Select handle height best suited for your
tilling conditions.
Handle height will be
different when tiller digs into soil,
1. First loosen handle lock lever.
2. Handle can be positioned at different
settings between "HIGH" and =LOW"
positions.
3. Retighten handle lock lever securely
after adjusting.
Handle (Low) Position
Handle (High) Position
Handle Lock Lever
15

Publicidad

loading