Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE ON THE TRANSIT
LEVER
A transit lever is provided at the bottom of the unit to protect
the optical system against shock during transportation.
Before operating the CD player, be sure to move the lever
in the direction of the arrow and secure it.
1 Loosen the red screw with a screwdriver.
2 Insert the screwdriver into the slot in the lever and move it
in the direction of the arrow until it stops.
3 Tighten the red screw.
Le Screwdriver
Red
)
Slot
Transit lever
Bottom
Qu
©
©)
©
When transporting the unit again, move the lever in the
opposite direction of the arrow and secure it with the screw.
GENERAL DESCRIPTION OF
CDP-555ESD
Direct selection
You can play a desired selection simply by pressing the
corresponding numeric button (1-20).
(See page 14.)
Program play
You can play up to 20 selections in the desired order.
Selections can be programmed even after play begins.
(See page 16.)
Variety of playing modes
Disc, program, single, shuffle and repeat playing modes.
(See pages 12, 15, 16, and 18)
Large and easy-to-read window display
Shows the elapsed playing time, the remaining time of the
selection being played, the remaining time of the whole disc
or remaining programmed selection numbers.
(See page 20.)
Memory back-up function
Keeps the information in memory for three days even with
the power off.
(See page 22.)
Pure sound
Independent power transformers for audio and digital
signals remove the mutual interference between analog and
digital signals.
Publicidad
