HT SOLAR03 Manual De Instrucciones página 25

1. PRECAUTIONS AND SAFETY MEASURES
The instrument has been designed in compliance with the essential
prescriptions of safety directives relevant to electronic measuring
instruments. For your own safety and to avoid damaging the
instrument we suggest you follow the procedures hereby described
and to read carefully all the notes preceded by the symbol
and after carrying out measurements, carefully observe the following
instructions
•
Do not take measurements in wet places as well as in
the presence of explosive gas and combustibles or in
dusty places
•
Avoid any contact with the circuit being measured if
no measurements are being carried out.
•
Avoid any contact with exposed metal parts, with
unused measuring probes, circuits, etc.
•
Do not carry out any measurement in case you find
anomalies in the instrument such as deformation,
breaks, substance leaks, absence of display on the
screen, etc.
•
Only use original accessories
•
This instrument has been designed for use in the
environmental conditions specified in section § 7.2.
•
We recommend following the normal safety rules
devised to protect the user against dangerous
voltages and currents, and the instrument against
incorrect use.
•
Do not apply any voltage to the instrument's inputs.
•
Only the accessories provided together with the
instrument will guarantee safety standards. They
must be in good conditions and be replaced with
identical models, when necessary.
•
Do not subject the instrument's input connectors to
strong mechanical shocks.
•
Make sure that batteries are correctly installed
The following symbol is used in this manual and on the instrument:
CAUTION: keep to what described by the manual. An
incorrect use could damage the instrument or its
components
This symbol indicates that equipment and its accessories
shall be subject to a separate collection and correct
disposal
25
CAUTION
SOLAR03
. Before