Publicidad
Idiomas disponibles
Idiomas disponibles
2. Do not operate power tools in
potentially explosive environments,
such as in the presence of flammable
liquids, gas or dust. Power tools create
sparks which may ignite the dust or
fumes.
3. Keep bystanders, children and
visitors away while operating the tool.
Distractions can cause you to lose
control.
ELECTRICAL SAFETY
1. Double Insulated tools are equipped
with a polarized plug (one blade is
wider than the other). This plug will fit
in a polarized plug only one way.
2. If the plug does not fit fully into the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install a polarized outlet. Do not alter
the plug In any way. Double insulation
eliminates the need for the three-prong
grounded power cord and grounded
power supply system.
3. Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is
increased risk of electric shock if your
body is grounded.
4. Do not expose power tools to rain
or wet conditions. Water entering the
power tool will increase the risk of
electric shock.
5. Do not abuse the cord. Never use
the cord to carry the tool or pull the plug
from an outlet. Keep cord away from
heat, oil, sharp edges or moving parts.
Replace damaged cords immediately.
Damaged cords increase the risk of
electric shock.
6. When operating a power tool
outdoors, use an outdoor extension
All manuals and user guides at all-guides.com
cord marked "W-A" or "W". These
cords are rated for outdoor use and
reduce the risk of electric shock.
7. When not in use, disconnect from
the power source and store in a safe,
dry childproof location.
PERSONAL SAFETY
1. DO NOT operate power tools In
explosive atmospheres, such as in the
presence of flammable liquids, gasses
or dust. Power tools create sparks
which may ignite the dust or fumes.
2. Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use the
tool while tired or under the influence
of drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
3. Dress properly. Do not wear loose
clothing or jewelry.
4. Wear approved safety eye/face
shield, ear defenders and hand
protection.
5. Contain long hair. Keep your hair,
clothing and gloves away from moving
parts. Loose clothing, jewelry or long
hair can be caught in moving parts.
6. DO NOT disassemble the Heat
Gun. Take it to a qualified professional
when service or repair is required.
7. DO NOT use this Heat Gun for
tasks it is not designed to perform.
WARNING
To avoid fire or toxic reaction, never
use gasoline, naphtha, acetone,
lacquer thinner or similar highly volatile
solvents to clean the tool.
3
Publicidad
