Bosch Professional GSB 20-2RE Instrucciones De Servicio página 17

power tool is guided more secure with both hands.
u Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
u Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Product Description and
Specifications
Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic
Machines with electronic control and right/left rotation are
also suitable for screwdriving and thread-cutting.
Technical Data
Impact Drill
Article number
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact rate
Rated torque
– 1st gear
– 2nd gear
Spindle collar dia.
Speed preselection
Right/left rotation
Key type drill chuck
Keyless drill chuck
Maximum drilling diameter (1st/2nd gear)
– Brickwork
– Concrete
– Steel
– Wood
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230V. For different voltages and models for specific countries, these values can vary.
2 609 141 227 | 05.2015
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Manual GSB 2-20 e GSB 2-20 RE .indd 17
Product Features
1 Keyless chuck *
2 Front sleeve *
3 Rear sleeve *
4 "Drilling/Impact Drilling" selector switch
5 Rotational direction switch(GSB 20-2 RE)
6 Lock-on button for On/Off switch
7 On/Off switch
8 Thumbwheel for speed preselection(GSB 20-2 RE)
9 Gear selector
10 Button for depth stop adjustment
11 Wing bolt for adjustment of auxiliary handle
12 Auxiliary handle (insulated gripping surface)
13 Depth stop
14 Handle (insulated gripping surface)
15 Chuck key *
16 Key type drill chuck *
17 Screwdriver bit *
18 Universal bit holder *
19 Allen Key **
* Acessories shown or described are not part of the standard items
that comes with the product.
** Commercially available (not included in the delivery scope).
GSB 20-2 GSB 20-2 RE
Professional Professional
3 601 AA2 0.. 3 601 AA2 1..
W 800
W 420
min -1 1100
min -1 3000
min -1 740
min -1 1930
min -1 48000
Nm 4.8
Nm 1.8
mm 43
–
–
–
mm 20/16
20/16
mm
mm 13/6
mm 40/25
mm 1.5–13
Kg 2.6
/II
17
English |
GSB 20-2 RE
Professional
3 601 AA2 2..
800 800
420 420
0 – 1100 0 – 1100
0 – 3000 0 – 3000
0–740 0–740
0–1930 0–1930
48000 48000
4.8 4.8
1.8 1.8
43 43
–
20/16 20/16
20/16 20/16
13/6 13/6
40/25 40/25
1.5–13 1.5–13
2.6 2.6
/II /II
Bosch Power Tools
19/05/15 12:01