Bosch Professional GSB 20-2RE Instrucciones De Servicio página 20

20
| English
For drilling in metal, use only perfectly sharpened HSS drill
bits (HSS=high-speed steel). The appropriate quality is
guaranteed by the Bosch accessories program.
Twist drills from 2.5–10 mm can easily be sharpened with
the drill bit sharpener (see accessories).
Maintenance and Service
Maintenance and Cleaning
u Before any work on the machine itself, pull the mains
plug.
u For safe and proper working, always keep the
machine and ventilation slots clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in
order to avoid a safety hazard.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for Bosch power
tools.
In all correspondence and spare parts order, please always
include the 10-digit article number given on the type plate of
the machine.
2 609 141 227 | 05.2015
Manual GSB 2-20 e GSB 2-20 RE .indd 20
After-sales Service and Application Service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as well as
spare parts. Exploded views and information on spare parts
can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Disposal
The machine, accessories and packaging
should be sorted for environmental friendly
recycling.
If you discard your machine, accessories, do not put off in the
trash, please give it to a technical service Bosch. It will
providea better destination according the politics of
preservation of the environment, recycling parts according
the local laws.
Subject to change without notice.
Bosch Power Tools
19/05/15 12:01