INITIAL INSTALLATION
1.
Turn off circuit breakers and wall switch to the fan
supply line leads. (Fig. 1)
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
Check to make sure blades (H) will be at least
2.
30 in. from any obstruction and at least 7 ft.
above the floor. (Fig. 2)
3.
Remove all mounting bracket nuts (K) and
mounting bracket flat washers (P) from mounting
bracket (B). (Fig. 3)
1
2
3
7
H
7 ft.
min.
P
30 in.
min.
B
K