Vega TM COMFORT Instrucciones De Uso página 20

Translation of the original operating instructions – Vegetables cutter
Model with supply slide
Set the supply slide on the appliance using the screws and screw holes.

Press down the supply slide.

To assemble the disk-shaped cutter
Open the lid lock.

Open the lid.

Assemble the disk-shaped cutter.

To assemble the disk-shaped cutter
Put the selected cutter on the blade holder shaft.

When there is a dicing grid to assemble:
Fig. 2 Assembling the dicing grid
Assemble the dicing grid 80958.

Make sure that the convexity of the dicing grid is matching the convexity of the

case.
To assemble the disk-shaped cutters 80946

Turn the cutter to the right.

Make sure that the cutter is locked in place.

Close the lid.

Close the lid lock.

20