Bimar Goya Folleto De Instrucciones página 10

Fax +32 030 9904733

4. To operate the fan only, press "
5. To operate the heater, press the switches (6) and (7) on the lens side. For get warm air 900W press
(6) switch, and for get hot air 1800W press both switches (6) and (7). The thermostat knob (4) adjusts
the room temperature will be greater the more the knob is rotated toward the pos. maximum
(clockwise).
6. To completely switch off the appliance, press all the switches on side opposed to the lens, that it
(lens) switch off when the function is de-activated. For switch off the appliance, remove the plug
from the socket.
This device has a device against overheating: If the temperature exceeds a certain value,
automatically stops the operation. Turn off the main switch 0 / I, remove the plug from the wall
outlet, make sure the air outlet grille and the heating element are free of dust, lint, or whatever. Let
the device cool (about 15 minutes). Insert the plug into the outlet, turn on the switch, select the
features you want, will not boot or in case of doubt, consult a qualified professional.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
 Periodically check that the air-intake grill is not obstructed by fuzz or threads.
 Use a soft, slightly damp cloth to clean the body and glass; do not use metal scouring pads or
abrasive products.
 For long periods of inactivity, you must cover it and place it in a dry place; it is advisable to put it
in its original packaging to protect it from dust and humidity.
 A special tool is required to replace the lamp to flame effect (type G9): contact an authorized
service center, also for any repairs.
 If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
 Do not be covered under warranty all parts that may be defective for failure to follow the
installation instructions, or use, or maintenance, for damages caused by trasporto.Sono also
included the replacement or repair of all parts subject to normal consumption (lamps), and also the
removable parts (glass), and accessories for construction (strains in resin).
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a crossed-out wheeled
dustbin.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
". (5) switch on the lens side.
10 24
/
Assembly page 10/24