Craftsman 126.32565 Manual Del Operador página 20

3. Remove the lower guard operating arm 5 Press the arbor lock button to lock the
retaining screw. Release the guard operating arbor. (Fig. H)
arm from its pivot. (Fig. F)
\
(Fig. H)
(Fig. F)
4. Rotate the lower blade guard up into the
upper blade guard. (Fig. G)
6. Using the supplied Allen Key, release the
arbor screw to remove the blade.
(Fig. J)
NOTE: The arbor screw is reverse threaded.
Turn to the right to loosen and to the
left to tighten.
J
_f ....................
j ...............
(Fig. J)
(Fig. G)
7. Install the new 8-1/4" blade. Make sure
the rotation arrow on the blade matches the
clockwise rotation arrow on the upper guard.
20