Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 11. Location of the battery modules.
Install the fastening elements on both sides of the control
2.
module.
Fig. 12. Installing the fastening elements.
Use the fastening elements as a template to mark the position
3.
of 4 holes in the wall.
Fig. 13. Marking the position.
USER MANUAL
Remove the control module.
4.
Fig. 14. Removing the control module.
Use an electric drill with a 10 mm diameter drill bit to drill
5.
4 holes in the wall to a depth of 8 mm.
Fig. 15. Drilling of holes.
Insert the plugs into the drilled holes.
6.
Fig. 16. Inserting the plugs.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
31
Publicidad
