Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2: Press and hold down the (centre key) on the device for 3
seconds to start up. Then long press the (right key) for 5 seconds
to enter the network configuration mode, at this time, the host will
have a voice prompt "please use app to setup the network",
and you will see the blue indicator blinking (blinking once in 1 se-
cond) on the host.
Step 3: When you hear the voice message from "please use app
to setup the network" and see the blue indicator flashes (flashes
once in 1 second), please select the reminder "make sure the indi-
cator flashes quickly or a warning tone is heard" in the mobile APP
(figure 2), and then click "next", a new interface will appear (figure
3).
Step 4: Enter the Wi-Fi username and password (figure 3). Then
click "Next" to bring up the QR code interface (Figure 4). At this
time, point the camera lens at the QR code. When the host sends
a voice message "Connecting network", click "next" to display
the QR code interface (figure 4), click the "Hear the warning tone"
option in the interface (figure 4), and the "adding device" interface
(figure 5) appears. After about 30 seconds, when the host sends
the voice message "network setup successfully", the network
setup is finished, and the interface of (figure 6) appears. Click "Fini-
shed" and then click "Security camera" to enter the video interface.
15
3
4
Publicidad
