Service And Maintenance; Environment - Festool VAC PMP Manual De Instrucciones

WARNING
To prevent accidents, always remove the plug
from the power supply socket before carrying out
any changes or maintenance work on the tool!
Do not use compressed air to clean the electrical

tool! Do not try to clean parts inside the tool in
this way, as you could let foreign objects in
through the openings of the tool housing.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/ser-
vice
EKAT
Use only original Festool spare parts!
4
Order No. at: www.festoolusa.com/
5
3
service
2
1
To ensure constant air circulation, always keep the
ventilation openings on the pump clean and free of
obstruction. Clean the protective grille with a dust
extractor. If damaged, have the protective grill re-
placed by an authorised service workshop.
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at

Service and maintenance

Prepare for storage
Switch off vacuum pump

Disconnect mains cable and wrap around cable

spool [1-1].
Disconnect hose and wind up lightly.

Store device in horizontal position.

Replace the air filter
 We recommend changing the air filter [5-1] ev-
ery 12 months to avoid damage to the pump.
To replace the air filter [5-1] follow the steps

detailed in the assembly instruction provided
with the spare part.
5

Environment

an environmentally responsible recycling centre.
Observe the respective national regulations.
5-1
11