Machine-related safety instructions
– To Reduce the Risk of Electric Shock or Injury,
Use Indoors only.
– Do not operate the machine unless the indicator
on the vacuum gauge is within the green sector.
Check the vacuum prior to each machining pro-
cess.
– The vacuum pump may not be operated when in-
stalled in the SYSTAINER or other transport con-
tainer such as a crate etc.
The vacuum pump VAC PMP designed to generate a
vacuum. The vacuum pump VAC PMP is designed
for industrial applications.
For indoor use only. The vacuum pump VAC SYS VP
must be operated at less than 6500 ft (2000 m)
above sea level.
Vacuum pump
Volume flow (air) max.
Current
End pressure abs.
Motor speed
Ambient temperature range
Ambient pressure
Weight
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. While reading the manual you can fold out
the page for comparison and quick reference.
[1-1]
Cable spool and support
[1-2]
Vacuum gauge
[1-3]
Vacuum connection
[1-4]
On/Off switch
8
– Do not expose parts of the body to vacuum forces
– Observe the maximum air humidity:
Operation
Storage
Intended use
The vacuum pump should only be connected to a
Festool clamping unit VAC SYS SE.
Technical data
Functional description
[2-1]
[2-2]
[2-3]
[2-4]
[2-5]
[2-6]
Temperature
68 °F (20 °C)
104 °F (40 °C)
68 °F (20 °C)
104 °F (40 °C)
The user is liable for improper or non-in-
tended use.
124 cu.ft./h (3.5 m
41 °F - 104 °F (5 - 40 °C)
Atmospheric pressure
20.4 lb (9.25 kg)
Slide valve
Rotary knob for clamping the suction
plate
Locking pin for suction plate
Clamp lever for tilting fixture
Foot valve
Suction plate
Relative
air humidity
95 %
60 %
95 %
80 %
VAC PMP
3
/h)
2.5 A
150 mbar
3300 rpm