Publicidad
Idiomas disponibles
Idiomas disponibles
injured or who lose their balance easily.
PRODUCT DESCRIPTION
Antislip edges
SAFETY PRECAUTIONS
Failure to follow the safety precautions may result in the risk of serious injury.
•
Don't exceed the maximum supported weight of 100 kg
•
Ensure that all components are secured before use.
•
Ensure that the product is in good working order.
•
Visually check the product
•
Before each use of the product, the condition of the seat and the anti-slip edges should be checked.
•
Check the suitability of the seat with the bathtub.
•
For use on bathtubs with a maximum external width of 69 cm, maximum internal width of 62 cm
•
Check the stability of the seat before use.
•
In case of damaged, broken, worn or missing parts, please contact the dealer.
MOUNTING & USE
•
Carefully unpack and examine the product to ensure that it is complete.
•
Before use, check for signs of damage, chipped paint, cracked or damaged seat. If you find any of these problems,
please contact us and refrain from using the product.
•
Make sure the seat fits in your bathtub according to the product dimensions (max. outside bathtub width: 69 cm,
max. inside bathtub width 62 cm)
MOUNTING :
1. Install the support tubes (1) in the seat handles (2). Secure them by tightening the
screws (3).
2. Install the rubber pads (4) under the seat handles (3).
3. Assemble the support tubes on the seat and adjust to the required width.
When the buttons on the tubes come out, the maximum width has been
reached.
DMI-F-06_Annexe 2_Notice.10
V2-24/04/2023
Seat
Page 5 sur 10
Publicidad
