Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY AND USE
ASSEMBLY
1. Position the wall plate against the wall at the required height and mark the position of the holes.
2. Drill the holes, depending on the fixings/screws used.
Note: As the substrate can vary considerably, we do not recommend any particular fixing; if in doubt, consult your
distributor.
3. Place the wall plate against the wall and secure using the chosen fixings. Once fitted, check that it is securely fastened
to the wall and that the arm can be raised and lowered without interference. Also check that the friction lock is
effective and that the support rail will hold at any angle during use (i.e. it will not fall out on its own).
4. Important: After installing the product, carry out a final tightening and inspection of all fasteners.
5 . Test the installation, ensuring that the rail is rigid and stable.
USE
- Only install the product in an area where the mounting surface and support are structurally sound.
- Modifications to reinforce the mounting surface may be necessary.
- Also check the type of support you intend to fix it to, for example brick, wood or concrete. Always check that the type
of fixing you are going to use is compatible with the substrate.
- Make sure that, when correctly positioned, the rail can be raised and lowered without interference from other fittings
and furniture and that the transfer can be carried out safely.
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
- Clean the product regularly with lukewarm water and a soft cloth. Do not use abrasive products, detergents or solvent-
based products.
- Dry with a soft, clean, dry cloth to prevent oxidation.
- Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide materials.
- Periodically check all screws, nuts and other components for wear and strength.
- Before each use, check the wall fixing components
- In the event of a malfunction, do not repair the product yourself. Consult an authorised dealer.
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When
transferring your product, remember to hand over all the necessary technical documents to the new user. Beforehand,
the product must be inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish
to carry out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious
injury.
•
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window
or near a radiator) or near a cold source.
•
Keep away from all flames and sources of sparks.
•
Respect the conditions for storing your product :
•
In a dry and temperate place
•
Protect your product from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
Version Juin 2023
7
Publicidad
