Briteq LD-Power 60 Manual De Instrucciones página 5

ENGLISH
HOW TO SET THE THE RIGHT STARTING ADDRESS:
Refer to the next chapter (DMX-512 address setting) to learn how to set the starting address on this unit. The
start address of each unit is very important. Unfortunately it is impossible to tell you in this user manual which
start addresses you have to set because this completely depends on the controller you will use... So please
refer to the user manual of your DMX-controller to find out which starting addresses you must set.
Example settings for different channel configurations:
 1 Channel mode:
001 (unit1), 002 (unit2), 003 (unit3), ...  intervals of 1 channel
 4 Channel mode: 001 (unit1), 005 (unit2), 009 (unit3), ...  intervals of 4 channels
 11 Channel mode:
001 (unit1), 012 (unit2)
DMX-CONFIGURATION OF LD-POWER60 – MODE 1:
BRITEQ (LD-SERIES)
®
OPERATION MANUAL
 intervals of 11 channels
5/65 LD-POWER60 / LD-POWER120
ENGLISH
DMX-CONFIGURATION OF LD-POWER60 – MODES 2 + 3:
DMX-CONFIGURATION OF LD-POWER60 – MODES 4 + 5 + 6 + 7:
BRITEQ (LD-SERIES)
®
OPERATION MANUAL
6/65 LD-POWER60 / LD-POWER120