Craftsman 675 Serie Manual Del Operador página 12

Log Dislodger
The log dislodgerisdesignedto removeanypartiallysplit woodfrom
thewedge.This may occur whilesplittinglarge diameterwoodor
freshlycut wood.
3. Standin front of the log splitterto operatethe controlhandleand
to stabilizethe log. See Figure12.
Neverremovepartiallysplit woodfrom the wedgewith your hands.
Fingersmaybecometrappedbetweenthe split wood.
1. Tofreethe wedgefroma partiallysplit pieceof wood,placethe
controlhandlein the REVERSE position.As it movesback,the
split woodportionwillcontactthe log dislodgerand become
detachedfrom the wedge.
2. Onceremovedfrom the wedgewith the log dislodger,splitthe
woodfrom theoppositeend or in anotherlocation.
Vertical Position
1. Pull the horizontalbeamlock outto releasethe beamand pivot
the beamto theverticalposition.
2. Tolock the beamin the verticalposition,pull out on the vertical
beamlock and rotateit to securethe beam.See Figure11.
IVertical BeamLockI
Figure11
Figure12
Horizontal Position
1. Pullthe verticalbeamlock out and rotateit down. See Figure
13.Pivotthe beamto the horizontalposition.Thebeamwill lock
automaticallyin the horizontalposition.
HorizontalBeamLock
Figure13
12