Samsung RFG238 Serie Manual De Usuario página 14

ASSEMBLE THE FREEZER DRAWER
1. Pull out the rails fully on each side of the cabinet.
2. Attach the freezer door front onto the open slots on the sides.
3. Tighten 4 hex head bolts completely with a socket wrench(10mm).
4. Insert the lower basket ({_) into the rail system.
5. Hook the ends of the tilting pocket ((_) onto the brackets and
push down until they are locked into place.
6. Insert the upper drawer.
Remove 2 pieces of tape ({_}) attached to the side of the drawer bin.
Reattach the tape in the same position when moving the refrigerator to
prevent scratching the drawer bin.
\
\
14 sett],9 up //