Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
[]
INSTALL OUTER CASE IN WINDOW
D
Thread nut onto bolt, then thread the bolt into
the triangle bracket as shown in the figure
below.
r_
Attach triangle bracket onto bottom of case
using three type B screws for each bracket.
Make sure that the bracket is close enough to
the outside wall that the bolt con touch. Adjust
bolt so that it is snug against the outside wall.
1
NOTE: A block of wood con be placed between
the bolt and the outside wall if the bolt rests
between studs.
I%-I C OMPLETE INSTALLATION
r_
Insert the foam seal behind the top of the lower
window sash and against the glass of the upper
window.
A
A. Top of lower
sash
B. Foam seal
r_
Place the window lock bracket as shown. Use
a 1/8" drill bit to drill a starter hole through
the
hole in the window
lock bracket and into the
upper window.
-ACAUTION:
To prevent broken glass or damage to windows,
on vinyl or other similarly constructed
windows,
attach the window
locking bracket to the
window side jamb with one type B screw.
D
Attach the window
lock bracket to the upper
window with a type C screw to secure the
window in place.
Vinyl
Wood
r_ Remove backing on bottom
seal. Place seal,
adhesive side down, on the bottom of the air
conditioner
behind the bottom
mounting
rail.
®
Seal
- Bottom mounting
rail
Front
11
Publicidad
