Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
D WINDOW
REQUIREMENTS
• These instructions are for a standard double-hung
window. You will need to modify them for other types
of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within reach of the
power cord.
• Follow the dimensions in the table and illustration
for your model.
Models
A
B
AHH18DP
17 13/8"
min.
28 3/8"-
38"
AHM18DP
I
!
B==4]
A
B
(With side curtain panels)
Y
r_l STORM WINDOW
REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will keep it
from draining properly.
To adjust for this, attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2"
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine
the thickness,
place a
piece of wood on the sill to make it 1/2" higher
than the top of the storm window
frame or the vinyl
frame.
Attach securely with nails or screws provided by the
installer.
1/2" higher
than storm
window
frame
Storm window
frame
1/2" higher
than
vinyl
frame
_
_(°ns°mewind°ws
v/Woo d
FnT[i
r5 J4
-
r'_
Vinyl frame
I I
[]
PREPARE THE AIR CONDITIONER
rA'l Remove three screws on each side of the case.
Save the screws for use later.
D
re]
Insert a flat head screw driver between the
front grille and the metal case along the sides.
Gently pry the grille from the case. NOTE: Cover
the flat head screw driver with tape to prevent
scratching
the case.
Using the handle on the bottom front of the air
conditioner,
pull the air conditioner
out of the
case. The air conditioner
is very heavy so make
sure that it will be resting on a sturdy surface.
\
Publicidad
