Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Attach side panels (B) to the solid wood
top (A) with M8 x 20 mm bolts (AA).
Note: Be sure to keep the solid wood top (A)
upside down on a soft surface, such as
carpeting or a piece of cardboard, to protect it
from scratches.
Ensure the bolts are screwed tightly. This
applies to all the bolts used in this unit.
Hardware Used
AA
M8 x 20 mm Bolt
2. Determine the desired location for the
right leg (D), insert it into side panel
(B), and tighten with M6 x 15 mm bolts
(BB) and M6 mm nuts (CC). Repeat
for the left leg (C).
Note: This table is adjustable in height from
32.8 inch to 40.8 inch in 1 inch increments.
The left leg (C) and right leg (D) should be at
the same height after installation.
Hardware Used
BB
M6 x 15 mm Bolt
CC
M6 mm Nut
1
B
x 8
2
D
BB
x 16
x 16
5
AA
A
B
CC
B
C
Publicidad
