Kobalt 19004 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
3. Use M6 x 15 mm bolts (BB) to fix
angel supports (E) to side panels (B)
and solid wood top (A). Place the unit
upright.
Hardware Used
BB
M6 x 15 mm Bolt
4. Attach the back strut (F) to the back of
the left leg (C) and right leg (D) with M6 x
15 mm bolts (BB) and M6 mm nuts (CC).
Carry the table to the desired place and
see if the solid wood top (A) is level. If not
due to uneven floor, use an adjustable
wrench (not included) to adjust the hex
nut until the top is level.
Hardware Used
BB
M6 x 15 mm Bolt
CC
M6 mm Nut
3
x 8
4
x 4
x 4
6
BB
E
A
A
D
F
BB
B
C
CC