Publicidad
Idiomas disponibles
Idiomas disponibles
3_
The ropeguideisattachedtothe
rightsideofthe
upperhandle.
See Fig. 3-3. Loosen the wing nut which secures the rope
guide.
Figure
3-3
4_
a.
Hold blade control
against
upper handle.
b.
Pullstarterropeoutoftheengine.Release
bladecontrol.
c.
Slip starter rope into rope guide.
d.
Tighten
wing nut.
Insert post on cable tie into hole provided
on the lower
handle. Pull cable tie tight and trim excess. See Fig. 3-4.
GrassCatcher
Followsteps
belowtoassemblethegrasscatcher.Makecertain
bag is turned
right side out before assembling
(warning
label will be on the outside).
a.
Place bag over fra me so that its black plastic side is
at the bottom.
b.
Slip plastic channel
of grass bag over hooks on the
frame. See Fig. 3-5. All the plastic channels except
center top of bag attach from outside
of bag.
f
Figure
3-5
c.
Attach center top of bag from inside of bag.
(
Figure 3-4
SECTION
3 -- ASSEMBLY& SET-UP
9
Publicidad
