Figure 7. Remove Baffle and Hardware
A. BaffJee
B. Carriage
Bolts
C. Nuts
D. Mower Deck Housing
iNSTALL
BLOWOUT
BAFFLES
1, Remove and discard existing baffles (A, Figure 7)
carriage bouts (B) and nuts (C) from mower deck
housing (D),
2, UnstaHLH baffle (A, Figure 8), and secure with
5/16-18 x 5/8 carriage bouts (C) and 5/16-18 Whiz
Lock nuts (D),
3, UnstaHRH baffle (B), and secure with 5/16-18 x 5/8
carriage bouts (C) and 5/16-18 Whiz Lock nuts (E),
Figure 8. Blowout
Baffle Installation
A. Baffle, LH
B. Baffle, RH
C. Carriage
Bolts, 5/16-18 x 5/8
D. Nut, Whiz Lock, 5/18-18
10