Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Aroha SM11R User manual
Please read the manual carefully to ensure safe, proper use and store it
in a safe place for future reference. Scan the QR-code or visit
www.invisionretail.com/manual
video to safely install your detector and consult the FAQ.
A. Activate/Deactivate the detector
The device is deactivated by default before leaving our factory. Before
the detector can be used, it must be activated.
Power on: Press and hold the test button (= centre front of detector)
until the red LED indicator lights up and a beep sounds; this takes at
........................................
least 10 seconds. After you release the test button the detector is activated and can be used.
Power off: Press and hold the test button (= centre front of detector) until the red LED indicator
lights up twice and a beep sounds twice; this takes at least 10 seconds. After you release the test
button the detector is deactivated and cannot be used.
CAUTION
The installation instructions must be
followed
strictly
conditions.
Do not paint your detector.
The battery cannot be replaced; do
not try to replace the battery as this
will render the detector unuseable
and can cause a fire due to the high-
capacity lithium battery.
B. LED indicators
Normal status:
Test status:
Silence mode:
Low battery status:
Fault status:
03
for the step-by-step instructions with
to
avoid
unsafe
Green LED flashes once every 60 seconds.
Red LED flashes once every second.
Red LED flashes once every 8 seconds.
Red LED flashes once every 60 seconds and 1 beep every 60 seconds.
Red LED flashes once every 40 seconds and 1 beep every 40 seconds.
Instructions, video & FAQ
85 dB alarm
Test/silence button
LED light
Publicidad
