Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROLS AND ACCESSORIES
All pictures and descriptions of the controls can be found on the first pages of this user manual. In
text you will be linked to the images within the individual descriptions. The images shown in the user
manual may not exactly correspond to the delivered design, they serve mainly for a better
understanding of the text of the instructions.
SAFETY SYMBOLS USED
Warning! / Danger!
Read the instruction manual.
Wear protective gloves!
Class II: Double insulation
SAFETY INSTRUCTIONS
General safety information for power tools
Warning! Read all safety-related information and safety instructions! Failure to
observe the safety information and instructions may result in electric shock,
burns and/or severe injury.
Keep the safety information and instructions for future reference.
The term 'power tool' as used in the safety information and instructions includes both mains-operated
tools (with power cord) and battery-operated tools (without power cord).
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
c)
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
c)
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Wear dust mask!
Wear ear protection!
Wear eye protection!
Confirms the conformity of electrical
equipment with the requirements of
the relevant European Union
directives.
EN - 22
Publicidad
