Programming Radio Stations - Philips AZ2425/01 Manual De Instrucciones

PROGRAMMING RADIO STATIONS

You can store up to 29 radio stations in the memory. When tuning
to the preset station, the preset number (1 to 29) is indicated in
the display.
1. Tune to your desired station, following the three steps given
under TUNING TO RADIO STATIONS.
™ If the frequency is already stored in the memory, the preset
number will be displayed.
2. Press PROGRAM to activate programming.
™
will start flashing on the display.
PROGRAM
3. Press the PRESET control (up or down) to allocate a preset
station number from 1 to 29.
4. Press PROGRAM again to confirm the setting.
5. Repeat the above four steps to store other frequencies and
presets in the memory.
– You can clear a preset number by storing another frequency in
its place.
Tuning to preset stations
There are two ways possible in which you can tune to preset
stations:
– Press the PRESET 4, 3 control (down, up) on the set.
– By remote control, press PRESET 4, 3 (down , up), until the
desired preset number appears on the display.
DIGITAL TUNER
A Z 2 4
A Z 2
FM PROGRAM
STEREO TUNER
11