Torin BIG RED TY10003 Manual De Instrucciones página 7

SYSTEM AIR PURGE PROCEDURE
IMPORTANT: BEFORE FIRST USE
All numbers in parenthesis () refer to the index number from the parts breakdown. Perform the following Air
Purge Procedure to remove any air that may have been introduced into the hydraulic system as a result of
product shipment and handing. This step is to be completed without and weight on the shop press.
1. Turn the Release Valve counter-clockwise to release the pressure in the pump and hose.
2. Lossen bleeder screw to release air from system.
3. Check the oil level and add oil if necessary. (See instruction in Maintenance Section "To Add Oil".)
4. CLose bleeder screw.
7