Adding The Weight Plate - CooperSurgical K-SYSTEMS AV1 Manual Del Usuario

AV1 AND AV5 USER MANUAL

2.3.2 Adding the Weight Plate

AV1 Table
1) Place the floater on a flat surface
2) Remove the screws from the
bottom plate, remove the plate.
3) Add the extra weight
4) Mount and screw the bottom plate
on again
AV5 Table
1) Place the floater on a flat surface
and remove the screws
2) Remove the bottom plate and add
the extra weight
3) The extra weight in place
4) Mount and screw the bottom plate
and reinsert screws
9