Lepu Medical LFR30B Manual De Usuario página 4

1.4 Environmental protection
The company designs and manufactures products for body
temperature measurement according to the safety and
environmental protection requirements. The equipment will
not cause any harm to people or the environment if any
outer cover of the product is not taken apart or the
equipment is always used in a correct way. When materials
that are potentially hazardous to the environment must be
used, as permitted by laws and regulations, they must be
handled in the right way.
Warning:
Do not dispose wastes generated by the thermometer
products with industrial or household waste together, please
use separate collection facilities.
Please handle wastes generated by thermometer equipment
based on proper method and dispose of instruments when
they reach its service life in accordance with local and
national environmental regulations.
Please make recycling use of wastes if they are reusable
after handled by qualified company to reduce environmental
pollution.
Related issues please refer to the company's services, or
deal with them in the proper way according to local garbage
collection requirements.
Chapter 2 Product Description
2.1 Intended Purpose
2.1.1 Medical Indications
Infrared forehead thermometer is an infrared thermometer
intended for the measurement of human body temperature in
people of all ages without contact to the body and may be
used by medical professionals or by consumers in a home
environment.
2.1.2 Contraindication
N/A
2.1.3 Intended patient population
The device is intended for adults and infants, except
premature.
2.1.4 Intended Users
The device is intended to be used by medical professionals or
lay person who can express themself normally.
2.1.5 Clinical benefits to be expected
Ensure accuracy of the measurement.
5
2.2 Residual Risks and Undesirable Side-effects
Residual risks and undesirable side-effects that may be
related to the use of infrared forehead thermometer can
include but may not be limited to the following:
·Incorrect measurement result
·Cross infection
·Electrical shock
·User poison
·Environment pollution
·Fire or explode
·Inconvenience to user, such as too noisy, poor usability,
inaudible sound, too hot surface
·Delay measurement, such as Damage of integrity, Short
circuit, Electromagnetic interference, No output, Can not
normally work, Can not normally operate, Button or shell
failure, LCD failure, Wrong operation
2.3 Structural composition
The infrared forehead thermometer is composed of sensing
probe, mode switch button, on/off button, bottom shell,
display, memory button.
2.4 Product photo
Component
Turn on the product.
On/off button
Start to measure the temperature
Review the stored temperature values.
Set the voice.
Memory button
Delete the stored temperature values.
Switch between ℃ and ℉
Mode switch
Switch between body mode and
button
calibration mode
Display Display measurement value and symbols
Bottom shell Protect the battery, PCBA
Sensing probe Measure temperature
Function
6