Lepu Medical LFR30B Manual De Usuario página 5

2.5 Display screen
1. Calibration mode symbol
2. Temperature display value
3. Sound switch symbol
4. Body mode symbol
2.6 Packing list
Names of articles
Instruction manual, including warranty card
and certificate of conformity
2 batteries, AAA 1.5V
Main engine
※ Product packaging should contain the items described
above. In case of any shortage, please contact Shenzhen
LEPU Intelligent Medical Equipment Co., Ltd. or the agent
distributor in time.
Chapter 3 Why the Infrared
Forehead Thermometer is Required?
3.1 Quick
With the innovative infrared technology, it can quickly
measure the body temperature in non-contact mode.
3.2 Accurate and reliable
By measuring the heat energy emitted from the forehead and
calculating the body temperature accordingly, accurate
readings can be obtained as long as it is held within a range of
5cm when measuring.
5. Unit symbol
6. Mnemonic symbol
7. Low battery symbol
8. Decimal point
Quantity
1
1
1
7
3.3 Simple and easy to use
The infrared forehead thermometer is about inductive
measurement. It can easily measure the body tempera-
ture, even for sleeping children.
Compared with the rectal thermometer, a non-contact
frontal thermometer can reduce the discomfort of children,
and it is simpler and more practical than other thermome-
ters in use.
3.4 Safe and hygienic
Contactless measurement can prevent the spread of
bacteria;
It is absolutely safe for children and adults.
Chapter 4 Product Installation and Use
4.1 Check
Please check the packing case carefully before unpacking.
In case of any damage found, please contact the carrier
immediately. Open the package correctly, take out the
infrared forehead thermometer and other components
from the case with care, and check them one by one
against the packing list.
When the equipment is moved a different environment, the
difference in temperature or humidity may lead to conden-
sation to it, in which case no use is allowed before conden-
sation disappears.
4.2 Install or replace batteries
The first step after unpacking is to install the battery. The
battery holder is on the back of the infrared forehead
thermometer. The battery installation steps are as follows:
(1) Open the battery cover.
(2) Insert the battery and keep +, - poles of the battery in
line with +, - poles of the battery holder.
(3) Close the battery cover.
Note:
Please use 2 AAA alkaline batteries.
Please do not mix-use old and new batteries if batteries
are the same type.
Remove the batteries when the thermometer will not be
used for a long time.
The symbol " " appearing on the screen indicates that
the batteries run out; please replace the batteries before
measuring.
4.3 Starting up
Press the "ON/OFF" button, then the backlight of the display
comes on, the LCD is shown in full screen and displays the
latest group of memory values, the equipment enters the
waiting state for measurement; at this time, the backlight
goes out, the LED on the forehead keeps flashing, and the
equipment gets ready for measurement. If there is no
operation for about 60 seconds, the equipment will shut
down automatically.
8