4. Using Instructions
4.1 Check for these situations
Check whether the device is damaged before each use: Always Inspect
your the device before each use. Look for cracks in the plastic, cuts, frays
or exposed wires in the USB power cord. If it has a damaged USB power
cord, if the device is cracked, if it is not working properly or if it appears
damaged in any way. DO NOT use the device. Please contact us.
4.2 First use and preparation
1) Remove the device and USB power cord from box.
2) Before using the device for the rst time, fully charge the battery. This
may take up to 2 hours.
3) To charge the device, insert on end of the USB power cord into the
USB Charging port on the device and the other end into a standard 5V
USB port.
(Refer to below Figure 1).
Note:
* The device can not be used while charging.
* The USB Charging port is only used for charging.
Power Button
Charging Indicator Light
Micro USB charging port
Standard 5V
USB Port
Figure 1
9