Publicidad
3.2 Project E Beauty LED Light Therapy Mask Package lists:
- Main device "Project E Beauty LED Light Therapy Mask"
- USB power cord
- User manual
3.3 The function of the device
Power ON/OFF:
Press the Power button (F) for 1 seconds to power on the device, you will
see that the LED module (E) emits red lights.
Press the Power button (F) for seconds again to power o the device.
Treatment Mode:
The device has two treatment modes:
Mode 1: the device emits Red and Infrared lights to treat wrinkles on the
face.
Mode 2: the device emits Blue and Red lights to treat mild to moderate
acne on the face.
After the device is powered on, you can short press the Power button (F)
to switch treatment mode between "Mode 1" and "Mode 2".
LED module:
Light source is delivered to the skin through the LEDs. The device has a
total of 36 LEDs.
When the device is working in Mode 1, 30 LEDs emit red lights, and 6
LEDs emit infrared lights.
When the device is working in Mode 2, 30 LEDs emit blue lights, and 6
LEDs emit red lights.
Charging:
The device can be recharged. Use the USB power cord to charge the
device when the battery has low charge. Please refer to Section 4.2 for
steps regarding how to recharge the battery.
7
Publicidad
