Publicidad
Idiomas disponibles
Idiomas disponibles
ii
i
Adding
Rinse Aid to dispenser
The use of rinse aid is required to prevent possible
spots on dishes water droplets remaning after the
completion of the wash cycle and to enhance the
performance of the dry cycle.
Only liquid Hnse aid can be used for this dishwasher.
• Filling Rinse Aid
1. Rotate the round cap counterclockwise
and
remove it.
• Rinse Aid Amount Setting
The factory setting is at level 3, which is where you
can expect the best performance under most
conditions.
Setting the rinse aid control to a setting
that is too low will contribute to spotting and
streaking of the dishes and poor drying performance.
Setting the control too high can cause foaming which
will cause poor wash performace or failure.
1. Remove the cap.
2. Rotate adjuster to the desired setting.
Rinse-Aid
:;:
_,
Indicator
0
',','_:" --O
1
Adjust Lever
_
(Rinse)
2. Add a liquid rinse aid to the maximum level.
(Max. 4.8 oz (145ml))
• Refilling Rinse Aid
4.8 oz (145ml) is the capacity of the rinse aid
dispenser. How often you need to refill the rinse aid
dispenser depends on your washing habits such as
the number of washes per month and which rinse
aid setting you use. The indicator light wilt inform you
when the rinse aid level is low. The indicator light will
stay on when you close the door to start a cycle.
3. Replace and lock the cap.
4. Rinse aid will be automatically dispensed during
the final rinse cycle.
18
Publicidad
