GE 23 Manual Del Propietario E Instalación página 26

Installation Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
• Do not install the refrigerator where the
temperature will go below 60°F (16°C) because
it will not run often enough to maintain proper
temperatures.
• Do not install the refrigerator where the
temperature will go above 100°F (37°C) because
it will not perform properly.
• Install it on a floor strong enough to support it
fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and plumbing
and electrical connections:
23' 133" wide},
23'/25' CustomStyle'" 25', 26'
Sides 1/8" (4 mm) 1/8" (4 mm)
Top 1" (25 mm) 1" (25 mm)
Back 1/2" (13 mm) 1" (25 mm)
DIMENSIONS AND SPECIFICATIONS
Water Electrical
L3/4"(19 mm)
Airspace
24" (61 cm) {1/2" [13 mm] Gap + 3.5 cm)
Cabinet/ 1/4" [6 mm] Wall Countertop
Plates)
, ± 1
DIMENSIONS AND SPECIFICATIONS
(for 23' CustomStyle" models)
o
o
o Lo
70YJ' (178.4 cm)
(91,4cm)
24"(61_m)
o
DIMENSIONS AND SPECIFICATIONS
(for 25' CustomStyle" models)
o
o
72YJ'(183.5 cm)*
o
"721/4"
(183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed above
refrigerator have doors that are flush to the top of
the opening for the refrigerator, then an additional
1/8" may be required to provide clearance for
cabinet doors to open freely.
26