a waste oil treatment company.
Before any use
(only for driven machines)
Check the clutch point:
With the engine running and the drive
switched off, the unit cannot move forward.
When the engine is running and the wheel
drive is switched on, the unit must move
forward.
If necessary, adjust the clutch point with the
knurled tool/clamping nut on the lever and
wheel drive or Bowden cable.
After the first 2-5 hours of operation
- Change the oil, see the enclosed Engine
Manual.
Once a season
To change the oil, see the attached Engine
Manual. Lubricate the pivot points and the
ejection flap springs.
At the end of the season have a specialized
workshop check and service the unit.
Cleaning the grass collector
The easiest cleaning is done immediately
after mowing.
Detach and clean the grass collector.
It can be cleaned with a jet of water (garden
hose).
Allow the grass collector to dry completely
before using it again.
Always
clean
the
immediately after use.
Clean the cutting deck and the ejector cover
with a brush, broom, or rag, place the unit on
its wheels, and clean off any visible grass
clippings and dirt.
Danger of explosion and fire.
Never store the unit with fuel in the tank where
fuel vapors may come in contact with open
flames or sparks.
Material damage to the equipment.
Store the device with a cold engine in a clean,
22
unit,
if
possible,
dry room. Protect it against rust when it is
stored for a long time, e.g. in winter.
After the season or when the unit will not
be used for more than a month:
Pour the gasoline from the tank into a suitable
container and store the engine as described
in the corresponding manual.
Always pour the fuel outdoors.
Clean the equipment and the grass collector.
Clean with an oiled (resin-free) cloth or spray
oil on all metal parts to protect them from rust.
07. Warranty
In all countries the warranty conditions given
by our distributing company or the competent
importer govern. We will eliminate any
malfunctions of your device within the
warranty limits free of charge, provided that
the cause is due to material or manufacturing
defects. In case you wish to If you wish to
claim under the warranty, please contact your
dealer or nearest branch.
08. Engine
The engine manufacturer is responsible for all
related issues regarding power, power
measurement, technical data, warranty and
service. For more information, see the
owner/user manual provided by the engine
manufacturer.