Publicidad
Idiomas disponibles
Idiomas disponibles
2. Connect the Supply for Non-Reverse Osmosis Connections
Threaded Connections
For Threaded Connections
Connect the faucet inlet hose to the cold water supply or cold water tee with the threaded nut.
Check all connections for leaks.
For Push-to-Connection Fitting Connections
NOTE: A 3/8" x 1/4" union (not included) may be required depending on the filtration system used.
Cut the end of the faucet supply hose and remove the nut. Verify that the cut end of the faucet supply hose is straight
and free of burrs.
Connect the faucet inlet hose to the filtration unit or push-to-connect supply tee.
Push the supply hose completely into the filtration unit.
Check all connections for leaks.
1534735-2-A
Push-to-Connect Fitting Connections
Unfiltered Water Faucet Supply
Tee
4
Faucet Inlet Hose
Kohler Co.
Publicidad
