Schluter LIPROTEC-PEBZS Instrucciones Breves página 38

2. Ensure that the power supply and Bluetooth mesh receiver
are connected to each other with plug connectors.
3. Plug the mains cable of the power supply into the intended
socket.
4. Activate the Bluetooth connection on the mobile device.
5. Select the Bluetooth mesh receiver in LED- ZONES-
CONTROL.
> The mobile device and the Bluetooth mesh receiver are
now paired via Bluetooth.
6. Enter a password if prompted to do so. Up to two pass-
words can be assigned during setup. You can make a
note of these passwords in the text fields on page 3.
> The LIPROTEC-EASY system can now be controlled
using the Schlüter
5.7 Teach additional Bluetooth mesh
receivers and the Bluetooth
remote control
On delivery, the enclosed Bluetooth remote control and the
Bluetooth mesh receivers have already been programmed to
each other.
However, for the Bluetooth mesh receivers to be controlled
using additional radio remote controls, these first need to be
taught. Even if the Bluetooth remote control included in the
delivery loses its connection, it can be taught again as de-
scribed below.
38
-LED-ZONES-CONTROL app.
®