Arenti AInanny Manual Del Usuario página 5

Basic Parameter
Product name
AInanny
Angle of view
���°
Pan/Tilt
�°~���°/��°~��°
Working temp
� °C to �� °C
Micro SD card
Local storage
(up to ���GB)
Connection of camera and App
The camera can be connected both to the monitor and the App. Generally, it is connected to the
monitor by default.
Follow the steps below to connect the camera to the App:
�. Make sure the Wi-Fi network is a �.� GHz network, as the camera doesn't support � GHz Wi-Fi.
�. Download the App on your phone. Register a new account to log in or log in directly.
�. Reset the camera using a pin until the status light is red in fast blinking.
(You have to connect the camera to the App within � minutes; otherwise, you have to reset the
camera again.)
(If you are using the monitor, the audio and video will be temporarily disconnected, and will
automatically resume after the camera is successfully configured with the network. The
maximum time is � minutes.）
�. Follow the step instructions on your smartphone to add the monitor, and scan the QR code
with your camera.
· Set up a router
The router supports �.�GHz WiFi (doesn't support the �GHz), and is connected to the WiFi
network. Please set the parameters of the router before connecting to the WiFi network, and
record the SSID and password of your WiFi.
support@arenti.com
Size
Power
Consumption
Supported phone OS
�.�G Wi-Fi
Please keep the network available
�� x �� x ���mm
DC �V, �A
Up to �.�W
iOS � / Android �.� and above
version
����-���� MHz
(Max. power＜��dBm )
EN
EN