Arenti AInanny Manual Del Usuario página 9

· Feeding reminder
Remind you to feed your baby, when you are too busy, or when you want to give your baby a
regular diet.
�. Press the Menu button on the monitor screen, and select
�. Press UP and DOWN direction buttons to select between �� time options, and press OK to
start the time setting.
�. When starting to set up one feeding time, press LEFT and RIGHT direction buttons to change
options between hour, minute, second, and on/off; and press UP and DOWN direction buttons
to change values and select on or off.
�. Select on or off to open or close feeding reminders. You can set up to �� feeding times one
day. And when the set time is up, a feeding alarm will appear on the monitor screen.
· Smart care
You can turn on functions of motion detection, noise detection, and cry detection, so that you
can know the baby's status immediately, no matter what you are doing.
�. Press Menu on the monitor and select
�. Press UP and DOWN direction buttons to select options between motion detection, noise
detection, cry detection, and alarm volume, and press OK to save.
�. When starting to set up one detection mode, press LEFT and RIGHT direction buttons to
change options, and press UP and DOWN direction buttons to adjust the sensitivity.
* You can select different sensitivity according to needs. Low is low sensitivity, and high is high
sensitivity.
�. When setting up the alarm volume, press LEFT and RIGHT direction buttons to adjust.
�. There will be an alarm when the set detection is triggered, press OK to stop the alarm.
support@arenti.com
> Smart Care.
> Feeding Reminder.
EN
EN