Arenti AInanny Manual Del Usuario página 7

· Camera selection method:
Note：
* For different products, you may add � or � cameras. If you have added � cameras, the monitor
screen will display � live views at the same time.
* If you want to set parameters or enable functions of one of the cameras, you need to select the
camera first.
On the home page, press
added two cameras.
If you have added two cameras, select one camera you need and press the OK button on the
monitor to enter full-screen viewing mode. And then you can press
zoom out. (Zooming function does not work when the screen is not in full screen.)
· Rotate the camera
You can adjust the monitoring angle for better vision.
The direction buttons on the monitor screen are available when the camera is powered on.
Press the direction buttons to rotate the camera horizontally and vertically for better vision.
support@arenti.com
button to switch the camera between Cam� and Cam� if you have
button again to zoom in and
EN
EN